R/C Tech Forums - View Single Post - TS4N troubles
Thread: TS4N troubles
View Single Post
Old 06-23-2006 | 09:01 PM
  #2  
hyper7vspec's Avatar
hyper7vspec
Tech Elite
iTrader: (9)
 
Joined: Dec 2005
Posts: 2,528
From: Adelaide , South Australia
Default

sounds very rich to me.to get 2.5 turns turn the main needle in fully then back out 2.5 turns.and if it is still blubbery lean it out till it will run.

dont get frustrated its a hobby have fun.put a smile on your dial
hyper7vspec is offline