R/C Tech Forums - View Single Post - Team Losi JRXS
Thread: Team Losi JRXS
View Single Post
Old 06-15-2006, 03:57 PM
  #11917  
Johnny Wishbone
Tech Elite
iTrader: (6)
 
Johnny Wishbone's Avatar
 
Join Date: Feb 2006
Posts: 3,756
Trader Rating: 6 (100%+)
Default

Mr Pookyt, I have a question that I just want to get straight in my thinking. I'm looking at Craigs setup sheet, as well as other ones and I just want to make sure I'm understanding this right as I'm reading them. He is running 2 shims under his pivot block and in the high position, so does this mean he is running the same shims under the rear pivot of the front of the car? If it was just under the front this would be considered a "kick" setting rather than a "roll center" setting, is this correct or am I inline for another smack. I just find it confussing when/or if the adjustment is being made at the same point but using 2 different places to indicate it. To me it would make more sense to have all three togeather on the sheet, if what I'm understanding is true. Thanks ahead of time for clearing this up for me. JP or Doug please feel free to jump in on this one as well.
Johnny Wishbone is offline