R/C Tech Forums - View Single Post - High Performance Nitro
View Single Post
Old 05-28-2006 | 01:50 AM
  #673  
Kyosho3PKRacer's Avatar
Kyosho3PKRacer
Tech Adept
 
Joined: Oct 2005
Posts: 167
From: Campbelltown,Australia
Default

Yeah me and James did a bit of testing today after the 1/5 meeting, i was running the new Sirio STI it is a screamer, very quick alot better than i expected it to be.

Then just fine tuned setup, i was looking at your setup you gave James, Wayne and i forgot some of my parts so i couldn't really try it so i made my own.

I ran 2.5 deg camber rear right, 3 deg rear left, 2 deg front right, 2.5 deg front left, 1 deg toe on front and i think 2 on rear and i took out the rear roll bar and had 40's all round.

It was pretty good, nice amount of steering and a little taily just to my liking but when VHT gets sprayed down it will be different so probably have to go up a shore on tyres.

I should write it down and you can give it a go, i'll try it on Sunday see how it is atleast i have something to start from now and go from there. Once i remember to bring all my springs and stuff i'll give yours a go. Maybe Saturday if nothing is on.
Kyosho3PKRacer is offline