Originally Posted by ljohnson
The Evo IV kit ones are the same width for each letter as the Evo IV MS or 415 blocks. The MS blocks are 1A etc. The 1 means that they are lower by 1mm, A width is still A.
Thankyou for that.
One more query, the Evo IV rear suspension blocks in standard form are 'A' at the front and 'E' at the rear which gives 3 deg toe-in, the manual also tells you which blocks to use if you want to change to 2.5, so instead of an 'E' you would use a 'D', or a 'B' if you opted for the 1 deg hubs.
The MS kit comes with a 'XB' at the front and a 'D' at the rear, I assume this gives 3 deg of toe-in. Can I use the standard Evo IV blocks on the MS to achieve the same options without affecting the track width or causing problems with the 46mm swing shafts not fitting
