R/C Tech Forums - View Single Post - Team Associated TC4
View Single Post
Old 05-03-2006, 06:22 PM
  #8425  
Grizzbob
Super Moderator
iTrader: (2)
 
Grizzbob's Avatar
 
Join Date: Feb 2002
Location: Sand Springs, OK
Posts: 3,075
Trader Rating: 2 (100%+)
Default

Originally Posted by SweetRacing
Looking for a little help on a pucs problems I am having with my TC4 on a dirt oval, high bite track.

I can drive hard inot the corner but about halfway through the corner and on acceleration, the car wants to climb the track.

I have tried changing springs, (currently silvers all around, except the right front I have a blue spring. 40wt oil all around as well.

Battery in the back.

Right side tires are -1 camber, left sides are at 0.....

I think that is everything?????

Any help would be appreciated.....
So if I understand your situation right, you say you're turning in ok going into the corners but pushing coming out of them? If that's true then you might see what caster blocks are on your car now, when you have less caster, it'll tend to steer the way you describe(more steering into the corner, but less coming out), & with more caster, it'll have less steering going in & more coming out(plus it'll be more stable on a straight). Check & see which blocks you have on it now, & then try adding some caster to see what happens(so if you have the 2 degree blocks, try the 4 degree ones, & if they're already 4's, try the 6's).....
Grizzbob is offline