R/C Tech Forums - View Single Post - sorry cant think of a sutable title
View Single Post
Old 04-18-2006, 11:34 AM
  #15  
trf racer
Tech Master
 
Join Date: May 2003
Location: UK
Posts: 1,244
Default

Originally Posted by BeastFromDaEast
so pushing the throttle about 1mm forward u hear a high noice is normal ? yes ?
but is the turning it by hand normal , the way it jumps around like the magnets inside are holding it still then leting it go ect. , thats normal ?
i cannot tell what 1mm does on ur radio.
if u push the throttle so the car takes up slack in the transiomission ie it goes to go but it cant,this is normal,bc the armature has to produce power to get over the cogging effect which is caused by the magnets this is normal.
motors perform best when they rev,running your car at low speeds will not tell you anything about how the car or motor are working,you could burn the motor out by doing this,what does the car/motor run like at high speeds.
what your trying to do is like trying to pull away from a standstill start in 4th gear,the motor cannot produce enuff power at little throttle.run your car normal speeds and se what it does.
trf racer is offline