R/C Tech Forums - View Single Post - E-Maxx Project
Thread: E-Maxx Project
View Single Post
Old 04-17-2006 | 06:25 PM
  #25  
RcCzarOfOld
Tech Addict
 
Joined: Feb 2006
Posts: 500
From: Canton, MI
Default

I just meant you'd have so much runtime with the 12,000mAh batts that you'd get bored with driving the truck around before the batteries died.

As far as the controllers, these are very good units with an adjustable cutoff so you won't damage the LiPo cells...

http://www.rc-monster.com/proddetail...MM160243sHCS01

For the motors, I really like the Fiegao units. Good quality but they don't cost an arm and a leg...

http://www.rc-monster.com/proddetail...540C_XL&cat=20

For the batteries, you can get away with the maxamps packs in an E-Maxx because they're pretty enclosed and you don't have to worry so much about damaging them. Plus, they're inexpensive comparitively. The 6000mAh 2s pack would be great but if you really want to go nuts, get the 12,000mAh one. It's the 8th one down on the page...

http://www.maxamps.com/index.html?lmd=38821.492616

Tony
RcCzarOfOld is offline