R/C Tech Forums - View Single Post

04-12-2006, 09:22 AM

#13744

Martin Crisp

Tech Fanatic

Join Date: Oct 2003

Location: Toronto Canada

Posts: 829

Trader Rating: 0

Quote:

Originally Posted by t4m1y4niac

hai martin, i've already try to reduce the rear toe from 3' to 2.5' and it can reduce my understeer problem but not completely gone, thanks a lot

, and before i try another tips from u, my car get coallision very2 hard and broke my 4' C hub & knuckle into pieces

.and the bad thing is my LHS doesn't have any spare of 4' C hub...my question is : if i'm using 2' C hub, do i have to change another set up or just plug and paly. thanks Martin.

That sucks...

If you use the 2 degree c hubs this will give you more initial turn in but less mid corner steering. You could add some spaces under the front hinge pin block at the front of the car to effectively add more caster back into the car to get back some mid corner steering. Start with a 0.7mm spacer then 1mm then 1.5mm and see what works.

M

Reply