R/C Tech Forums - View Single Post - 1/12 forum
Thread: 1/12 forum
View Single Post
Old 04-09-2006 | 03:07 AM
  #18056  
BrainTeased's Avatar
BrainTeased
Tech Master
iTrader: (4)
 
Joined: Jan 2004
Posts: 1,342
From: Melbourne
Default

Originally Posted by Pro ten Holland
I run 48pitch gears without any problems. Use Kimbrough spur gears and you can fit 12 diff balls in there.
i rechecked the spur gear and i noticed the outter holes include 12 holes. so im assuming there are bigger diff D rings out there to use with those 12 holes on those spur gears?

finally got my car handling 10 times better! it was due to my mulitple cable ties on my motor wires after taking them off the pod assembly twisted much more freely.

buttttt... everytime i take it onto the track after a short break of changing packs or something the car needs about 1-2 laps before the car's handling is stablised if you know what i mean, as after a break soon as the car his the track its very twitchy and the same tweak problem arises.

i think i should of went for a T-bar car as my first 12th
BrainTeased is offline