Hi guys, I have something that I don't quite understand, it has to do with setting up the TC4 chassis. I hope I explained it right. If I'm right. they say to use a ride high gauge. By sticking it under the chassis at all four Corners and adjusting shocks. To get the same 5 mm at all 4 Corners. That part I understand. Now they say find the center of the chassis which then you would put knife edge at the back or the fund and lifted slowly to see what
comes off the set up board first. And then they say to adjust with the shock that's the part I don't understand if I'm doing something wrong or going about it wrong I appreciate some help you but that's too different adjustments on the same shock. Help