Originally Posted by smojoe
any BD guys going to the carpet nats in stockton?
I don't wanna be the only "yokomo" guy there
What foams are you running? I found that the Parma foams fit without narrowing, and the rim won't rub the steering arm. But, with the new ROAR tech box, the car will not slide in because the front trac is too wide. I took the hex hubs and have removed about .5mm off the outside of the hub. This should make the tires set in closer to the chassis and allow the car enough room to side in the tech box. Only problem; is that the tires now rub on the steering arm.
I then removed about .7mm off the inside of the front tires and rim so they won't rub. Hopefully the car will now fit in the box, will see this Wed. I think the JACO rims may have a little less offset and may work in the tech box, without modifying the hubs. But you would still need to narrow the fronts to keep from rubbing.
