Originally Posted by bukil
I can't seem to get rid of my wide turn in my FT TC4. Anyone know how to fix this? Here are my specs:
Radio: M8 w/ Spektrum Module and reciever - D/R set at 85%; 100% on left and right turning.
Servo: Airtronics 94758z
Setup:
Front
Caster= 0
Camber= -1
Droop= 5
Springs= AE silver
Shocks Oil= 50wt.
Outer hole of the A-arm
Outer hole of the shock tower
Inner hole of where the camber linkages go
Rear
Caster= -2.5
Camber= -1.5
Droop= 4
Springs= AE silver
Shocks Oil= 40wt.
Outer hole of the arm
Second to the outer hole of the shock tower
Inner hole where the camber linkages go
Thanks,
Mark
that too is why I sold mine for the new xray t2. The TC4 would push no matter what I did to it. I got tired of fooling with it after I won the series with it. Just too damn much work just to try to go through corners. Best of luck with her.
scott