R/C Tech Forums - View Single Post - Hpi Pro 4
Thread: Hpi Pro 4
View Single Post
Old 02-11-2006, 08:54 PM
  #13887  
dodgeguy
Tech Champion
iTrader: (208)
 
Join Date: Jun 2004
Location: St Louis
Posts: 8,547
Trader Rating: 208 (100%+)
Default

Originally Posted by indix1
anybody have a good carpet setup
I am running pink/orange in the front and dbl pink in the rear.

Thank you
I have a great set up on carpet for the Pro 4. Works great at WOH.

Here is my set up.

Front
Shocks 3 piston Losi 45wt oil
AE yellow springs or Purple (try them both to see what you like)
Shocks mounted outer on arm. (Inboard will make the car turn in quick)
Upper 3rd hole out
Camber link outer hole with .75 shim
6 Degree caster blocks
1.0 for front arm mount (0 degree for not as quick turn in)
1mm roll center shims all around
rear most hole on knuckle
steering ackerman is stock
BSR Double Pink/ Orange

Rear
Shocke 2 piston AE 35wt oil
AE copper spring
Upper mount 3rd hole out
Middle hole bottom
Hub spacing stock
ball stud in inner hole on hub
inboard link set to inner hole 2mm spacer
2 degree toe
BSR Double pink/ purple

Thin purple hex hubs with thin and thick spacers
dodgeguy is offline