my top plate 3mm
how can i acheive -1 anti dive ?
When running the chris tosolini carpets 2004 setup what shock length should i use ? i put 61.5mm in front and 62mm in back. is that good?
it says adjust droop according to tire size , my tire size is 59mm what drop should i run ?
while using the short shock ends in the front and the above shock length the most amount of drop i can get is 6mm ( meaning I cant achieve say 5mm or 4.5mm because my drop screw arent touching and im sitting at 6)
on the front c-hub and rear hub what is difference in using the upper and lower hing pin hole?
track is 65x36 9.8sec lap is blistering im lingering arround the mid 11's with 10.9 being veryy seldom. please please help the sd get a win !
Also I want to get a LCG kit because I like the aluminum bulk heads the lower drive train. I hear the LCG is flexy and I race on carpet , will I still be able to run the current top plate I have (in picture) with the LCG kit ? Does anyone have any noted performance changes in the LCG kit ?
Last edited by easy e; 02-04-2006 at 10:23 AM.