Originally Posted by DR.FeelGood
any ideas?
I posted something way back very simular and found it to be my hand set (Mars Wheel) and motor mount, as when I switched on the hand set, the steering went to the left automaticly, but had noticed that the car would track out to the left and somtimes to the right, and thought it was the servo horn jumping a tooth, but found out it was the #1 setting on the hand set, the steering tweak on that particular setting had gone west, so went and set the hand set up on a fresh setting that had NOT been used before, and the steering was sound, BUT to stop the glitching I stuck a piece of lexon to the inside of the motor mount, as you only need to get a slight scratch in the black anodising and you WILL get interference, also I use fibre washers instead of metal washers for the motor mounting screws so that NO metal is touching the motor mount
Hope this one helps you Dr Feel Good
Cheers The
CanFanMan
