Thanks for the advice Mr. Mcgoo. You are absolutely right about the black shading. I was running a lower pressure but I realized too late that I should of thinned it out more. Shading is one of those things I need more practice on. And, I did have the fade from white to blue on there but I had to cut it off to fit the body. Next time I'll have to keep in mind where i'm going to be cutting. I did back the green with white but it didn't lighten up at all. For BadSign, the green is Spaz Stix Hard Metal Green. One coat of that is yellow, two coats is a nice lighter shad of that green, and three coats gets it that dark. Thanks guys. Hopefully, the next one will be even better.