Originally posted by TRF-Powered
Lowering the chassis by adding the spacer at the suspension blocks does have a limit. And it does have something to do with the ride height. Excessive spacers under the suspension block will put the chassis lower than what the damper can compensate. what I was suggesting was to achieve the difference of 1mm with smaller spacers.
yes the spacers were stock in WCR kits. but not in all the other M2 kits. and Tamiya did release those assorted spacers for people who wanna raise the suspension block.
True, but you will always have more travel then the ride height anyway.
I feel raising the blocks 5-6mm in the rear and 4-5mm in the front, gives the car a better roll centre then with 2-3mm.
The 1mm difference between the front and rear block only changes Anti-dive and Anti-squat.....