Originally Posted by James
gotta calm down i think haha..
just went for another tinker. the more i fiddle with it, the more the settings vary.
i had the toe change from 3deg one side, 2deg the other, to backwards, then 2.5, etc...
when i set my camber absolutely perfect. the toe was fine. and there's a bit of slop which can give varied readings.
all good really. im not worried haha
I agree mine would very from 2.5 per side to 2.5 left and 2.75 right, again this is with a setup board. I think guys who are using a more crude way of measuring toe are just having more error in the readings.