R/C Tech Forums - View Single Post

01-19-2006, 06:57 PM

#2001

letitroll

Tech Regular

iTrader: (4)

Join Date: May 2004

Location: Buffalo, NY

Posts: 326

Trader Rating: 4 (83%+)

My left rear toe is 1 deg and right is 1.5 deg. My plan was to use .5mm shims on each side to achieve 1.5 deg of toe. I'm actually using .75mm on the left and .5mm on the right in order to ballence it out. Must be a poor mold or something...

Reply