Originally Posted by tunnelhead
Thanks Customworksking. Let me see if I have this right
1. 50 weight oil front
2. 20 weight oil rear
3. run 2 hole pistons in the front and rear?
4. ride height 5.5mm front/5-4.5mm rear.
5. lost on the locked diff? Do you mean tighten it all the way. Have TA03 diff
6. 6mm wheel hex adapter?
7. lost on sedan insert plus mini s? M grip and type A's are the different Tamiya tires right?
8. Do you use the the Tamiya reinforced wheel or just the stock wheel and what inserts do you recommend? Hards or sfts and in the front or rear.
Thankyou for taking the time to answer my questions. It is very nice that you are willing to share your knowledge with other racers. Thanks for helping me get my Mini Cooper up and running. See you maybe at the finals?
ok 3. yes 2 hole FT & rear 5. yes or use the stock diff and add shims so its super tight...6.tamiya sell's 6mm wheel hexes buy em and put them on...7/8. yes tamiya sells Sgrip and Mgrip and a type A slick helps to have em all ..I cutout the insert of a old set of Takeoff cs27's Bule med insert cut it in1/2 it will be longer than the stock mini foam insert cut the blue insert about 1/2" longer than the mini foam or cut it to size stuff it in so it fits super tight almost overlaps than use the mini foam and yes mini rims stock or reinforced rims gule and glue the side walls ft only...Kevin
