R/C Tech Forums - View Single Post - Mugen MTX-4
Thread: Mugen MTX-4
View Single Post
Old 01-13-2006, 10:27 PM
  #3075  
Bad Mika
Tech Regular
 
Bad Mika's Avatar
 
Join Date: Nov 2004
Posts: 311
Cool

Originally Posted by Scott Fisher
For all those guys that are doing the weight watchers thing going on here lately, I got to weigh my car the other day. We are getting ready for the Winter Wind Up race so I decided it was time to check the weight.

My car has the following changes compared to a stock MTX4

Mugen Titanium pillow balls
Skyline radio tray support
Skyline hollow steel 2 speed shaft
Kawahara 1st gear adaptor
Kawahara 2 gear adaptor
Mugen Titanium upper screw kit
Mugen MTX3 rear CVD's installed on the front
Mugen MTX4 rear CVD's installed on the rear
RC products 4mm rear shock tower.
AMB Personal Transponder


I was using the following servos both with aluminum servo horns. I have a Futaba 9451 on steering and an Airtronics 94737 for throttle. I used a Protoform Dodge Stratus. I measured using a hotmod Novarossi N12LL3 with a monotuning 11 fin head (stock head weighs 42g, monotuning head weighs 45g). I weighed it using Kawahara tires trued to 58.5f, 59r.

My car weighed 1695g.
Hi Scott !

Noticed you are using tyres with a 0.5mm split of front and rear.

Just wondering whether you are using the 25T side pulley or still on 24T with overdrive setup ?
Bad Mika is offline