Originally Posted by RayWarner

ok guys a setup question:

running a converted 415 to msx with 3 hole pistons
losi 60 wt oil all the way around.
1c 1a frt blocks 1a 1d rear blocks
4deg. blocks
white frt springs yellow rear springs
2deg camber all 4 wheels
blue frt. sway bar
2mm shim on frt and rear links
0deg rear hubs



the problem is the car is real slow to enter shap corners at any decent speed. The car is awesome through the huge sweeper we have but slow giong into the tight "s" section

Any help would be great. Thanks.