R/C Tech Forums - View Single Post - carpet set-up for yokomo cgm
View Single Post
Old 12-31-2005, 07:46 PM
  #2  
pops
Tech Master
iTrader: (1)
 
Join Date: Dec 2001
Location: Arizona
Posts: 1,197
Trader Rating: 1 (100%+)
Default

Originally Posted by morris
hello,
i was wondering if someone could be helpfull on giving me a set-up to try for the yokomo cgm.i am using d/pink rears and d/pink/orande in the front.i basically need to know shouck oils/springs/ride height/droop.the basics.i tride using the car with a 40 weight oil in back and a 60 weight oil in the front.white rayspeed springs in the front and green yoke springs in the back.and i had purple foams all the way around.well the car was to aggresive.so i changed to the d/pinks-d/pink/orange and it was pushy.so then i tride a sway bar in the back and it helped alot.but the car was very wondery exiting a turn.and at last moment of exiting it came around with a very bad wash.i ran my droop at 1.5mm in the back and 1mm in the front.
any info on a better way to start would be greatly appreciated.
thanks for youre info guys.

matt morris
Run about 2mm of suspension travel in the front and 3 to 4mm of suspension travel in the rear. Go heavier springs in the front like Yokomo GT Gray and in the rear Yokomo GT Silver. Try asking this on the SD thread, you will get more help there.
pops is offline