Originally Posted by bender
n the process of doing some maintenance on the car I have stripped the heads on 3 of the 4 rear suspension blocks screws
What
Originally Posted by BritRacer
the other way, remove all other screws from that area of the car.
If the stripped screw is the only one holding the bulhead in, use the hex wrench to hold the screw in place and gently rotate the bulkhead itself in the unthread direction....there is often enough movement there to loosen. Today 05:59 PM
Won't work for one of the blocks in this case
I would seriously wait and try my method first before doing anything drastic been there cost me a new chassis .....