R/C Tech Forums - View Single Post - discharging problem
View Single Post
Old 12-30-2005 | 06:30 PM
  #2  
Monaro_Racing
Tech Addict
 
Joined: Aug 2004
Posts: 703
Default

I am having a similar problem with mine...... i set it to 10 amp discharge with a 6 cell GP3300 pack attached and it only discharges at 8 to 8.5 amps. but if i drop the discharge to 8amps it will discharge at 9.5 amps...... and it wont cut out either i had it say it discharged 15000mh+ out of a 6 cell GP3300 pack while i was at TCS and this was after a race too.....
Monaro_Racing is offline