Originally Posted by Scott Fisher
Uriah:
What setup do you have on your car. I may be able to give you a few suggestions. Also, do you need more on power steering, off power, or both.
The car had a bad off power push, and slightly loose on power. When I tried to push the car on power it breaks loose. I think this is mostly due to low traction.
I am using 37's all around.
rear hinge pins all the way down(I usually use this with low traction, up for high traction)
front pins all the way down
30K rear diff oil
kit shock springs
600 wt shock oil
no shims under camber link rear---middle hole inboard camber link
rear camber -3.5---2.0 front
-3 rear toe
-1 front toe
23 tooth pulley
I will play with it more when I get to FT Myers(high traction)
Basically a stock setup, any suggestion are appreciated.