Originally Posted by Guo Chean
Hi Danny,
i having this problem during my FEMCA race i n malaysia. i using IB3800 cell i think mostly the cell are 2nd generation. i used linear charge of 5amp at first the punch very perfect but after 2min30sec the punch was drop and flat until the cell dump. so after that i increase my charging amp to 5.5 amp the problem still the same. may i know is that my charging problem? thanks
It's most likely your motor setup. Once the comm gets to hot you will experience some fade in the motor. Try backig off the timing some on your motors while keeping the same gear ratio.