Originally Posted by toomanytoys
If your radio does not have a switch to reverse the channel you can swap the red and black wires at the steering servo connector.
I don't think that would be a good idea. That would be like plugging your battery into your esc backwards... smoke everywhere and one destroyed servo.
If you really want to reverse the rotation of your servo, you need to cut and switch the two outer pole leads on the servo's potentiometer. That's servo surgery that only experianced people should do.
Michael: like anthony390 said, there should be a steering servo reversing switch on your transmitter. What make and model of transmitter do you have? Someone might be able to point out where that switch is. If you have a computer radio, then you'll have to reverse the servo in the programming of your radio, which the instruction booklet will tell you how.
-Frank