R/C Tech Forums - View Single Post - Tamiya mini cooper
View Single Post
Old 12-10-2005 | 01:12 PM
  #906  
caltech1
Tech Apprentice
 
Joined: Dec 2004
Posts: 87
From: Sydney
SPEED ISSUES

G'day,
I am currently running a MO3L fitted witha TAO 3 Balldiff that is set up tight. Whenever I go through semi tight corners the car tends to lose speed. This allows others to catch up. I am running 60d's up front with 24mm insert and foam. I am also using the CVA mini shocks short with three internal o- rings 70 wt oil and blue short TRF shocks. The rear is 40 wt, three internal o-rings and red short TRF shocks. I have disconnected the swaybars both front and rear. Previously had the thick swaybars fitted to each end.

I am thinking of trying the thin swaybar up front to see if this will help. Any suggestions would be appreciated.

Thankyou.
Calvin.
caltech1 is offline