you need to install the 16/19 conversion belt and have a 2mm split on your tires. this will help the tire wear become almost even. the stock setting is fine if you're track is very low wear. but like in my case, i use the 16/19 on my mtx-3.
Originally Posted by asw7576
Is this me or happen to mtx3 owners :
Is it normal when rear tires become smaller in diameter than front the car's handling become worse and worser. ....... for examples, when the car turn and exit in tight corner, the car might skid for split seconds ( rear tires skid sideways ). It's annoying because I lose confident and push me to take next corners slower. This is not bottom out issue.