R/C Tech Forums - View Single Post - kyosho electric offroad
View Single Post
Old 12-05-2005, 08:42 AM
  #169  
Rysuleod
Tech Addict
iTrader: (1)
 
Rysuleod's Avatar
 
Join Date: Sep 2004
Location: Dallas, Texas
Posts: 581
Trader Rating: 1 (100%+)
Default

EDIT: Entire post edited to provide information I was checking on tonight.

Speaking of springs, the Kyosho springs are just slightly smaller in diameter than some Losi springs that I have. The top retaining ring is large enough to accomodate the diameter, but the bottom Kyosho retainer is just ever so slightly too small.

Putting the Losi lower spring retainer on the Kyosho ball end leaves a little too much wiggle for my liking. You cannot replace the Kyosho pivot ball end with a Losi one because the Losi one is bigger slightly and won't fit in the A-Arm..

THe thought of $6 springs is unappealing to me what can I say?

I found this chart somewhere that may explain what weight the #350 bottle of oil with lots of Japanese writing on it is in Losi or AE oil. If the chart is right its about 30 weight Losi.

CPS = LosiWT = Assoc.W
100 .... 10 .... 7.5
150 .... 15 .... 12.5
200 .... 20 .... 17.5
275 .... 25 .... 22.5
350 .... 30 .... 27.5
425 .... 35 .... 33.5
500 .... 40 .... 37.5

Last edited by Rysuleod; 12-05-2005 at 06:05 PM.
Rysuleod is offline