Originally Posted by Doughty
I agree and do pretty much the same as Aaron.
if you are going to re-use your brushes, keep them well away from motor cleaner if you are going to blast your end-bell, it dries out the brushes and they loose performance.
that i did not know, i usually clean them off with motor cleaner, i'll try and not get them with the motor cleaner and see what that does. I usually take my motors apart after every race and clean them with motor cleaner, then put them back together. I'll cut the come after every two weeks of racing usually (so usually i'll rebuild once the motor has about six runs on it), but i use a different motor for practice then i do for racing.