R/C Tech Forums - View Single Post - Orion Wasp newbie
Thread: Orion Wasp newbie
View Single Post
Old 11-25-2005 | 05:59 PM
  #7  
Tabushi's Avatar
Tabushi
Tech Elite
iTrader: (1)
 
Joined: Feb 2003
Posts: 3,061
From: Chile - Southamerica
Default
Originally Posted by Xyvern
http://www2.towerhobbies.com/cgi-bin...=++&search3=Go

Try this one by OFNA. BTW, DON'T TUNE YOUR ENGINE WITHOUT A TEMPERATURE GAUGE IF YOU ARE NEW TO NITRO. For how to tune your engine the only method I know off my head is from this link below and good luck.

http://www.cefx.net/tips/nitro/tuning/index.php




I dont agree with this ... ... ... a temerature gun its just for "reference" ... usually my engines run on 270ºF on my temperature gun, but if i measure with 2 or 3 of my friends guns, it shows a lower temperature ...

If the engine is giving a good smoke trail during the straight and on closed turns it fires a lot of smoke when it revs up ... for me its ok ... and after a minute or two i check temperature just for reference ...


My 0,0002 ...

.
Tabushi is offline  
Reply