Originally Posted by brettb76
I want to use some 64 pitch gears in my car. I cannot purchase them locally so I will need to buy them from overseas on the internet.
I want to have a final ration of 6.6:1.
Will a 88 tooth spur and 30 tooth pinion fit in a TA05.
Alternatively
Will a 132 tooth spur and 45 tooth pinion fit in a TA05.
Thanks
Originally Posted by brettb76
I am running in 540 class at my local club and they have a gear ratio limit of 6.6:1. I'm using 48 pitch and running 68/23 (6.652) but guys using different cars are running at 6.6:1 and have that slight edge. I want to be able to match them and 88/30 gives me the exact ratio.
I don't want to buy the parts and then have them not fit. $$$.
Because the gears are smaller than the 48 pitch gears I'm using, I'm not sure if the motor can be moved over far enough for the smaller gears to mesh.
I'm hoping someone has a TA05 and already has these gears. If you could test it for me would be great.