R/C Tech Forums - View Single Post - Slapmaster Tools MS2.3
View Single Post
Old 11-24-2005 | 01:35 PM
  #55  
Number 11's Avatar
Number 11
Tech Master
 
Joined: Sep 2002
Posts: 1,377
From: Kenmore, WA
Default

Originally Posted by stumper1
Thanks Weylin and Brian.

Good Job Allen!

Suggested starting set-up for stock at the Rain? Still per instruction sheet?

Tubes - Purple stuff / no springs
Shock - 25wt / Blue spring
Batteries all the way back
Roll center - middle?

Brian - I have a question about the staggered camber in the front. Is this just for even tire wear? I had always set both sides the same and rotated tires (left to right) every other run or so. Is there a beneift to the stagger that I am missing.

Thanks.
Hey Deric,

I ran the mod setup with the exception of tires. I used Jaco Purple/Grey I tried the Parma but I wasn't aware that you needed a flanged bearing for those and couldn't figure out for the life of me how the bearing was going to stay in there until Frank came over and told me. He had tried it earlier and couldn't keep the tires on.

Tubes - No oil forgot to add will add next time / .18 springs didn't have .20 out of stock
Shock - 25wt / Green spring
Batteries all the way back

Allen
Number 11 is offline