R/C Tech Forums - View Single Post - Electric motor break in
View Single Post
Old 11-18-2005, 10:27 AM
  #6  
DFroyd
Tech Fanatic
iTrader: (6)
 
DFroyd's Avatar
 
Join Date: Sep 2004
Location: Inver Grove Heights, Mn
Posts: 926
Trader Rating: 6 (100%+)
Default

After cutting the com I run them at 3 volts for 5 minutes, check wear pattern on the brushes. New motor run them 3 volts 10 minutes, check pattern on the brushes, cut the comm if needed, clean and reassemble. Good Luck!!
DFroyd is offline