Originally Posted by scramblingmaxx
Hey ryan6682 what do you have your carb settings set to,and your temp,my L is about 4, H is little under 2,but is a little sluggish on low end,iv'e leaned,and richened low,but still sluggish on bottom end, lean high end but not less then 1 1/2 turns, wakes up good but temp is about 270,280, i live in maine it's about 50 temp outside.temp is just to high to keep it set to that
It sounds like your low is too rich and your high is to lean. try leaning your lowend needle 1/2 turn and then backing out your high end till it runs really rich and then slowly retuning the high needle till you get good power and then see if the temps dont drop and you have better bottom end power.
My carb settings are irrealavent as I live in a totally different climate and altitude than you. After you get your high set you may need to lean your low needle a little more for good take off transition.