Originally Posted by crimson eagle
4. Step Charging (Multi Phasic Charge Mode, MPCM) On your version yes I think you need to hold down key six but I'm not too familiar with how it worked on those versions. However, I use 5/7/5 amps for the phases and I use hard pulse in the center phase set to 30%. It seems to give a little more run time. Once you get the MPCM set go to the set up menu and scroll through the options to set your changeover points. To set the currents, try hitting key 5 from the main charge/Discharge menu.
Chris
Ran a 19t all weekend @ the Crewe 12th scale National here in the UK just gone as I was testing Multi Phasic Charge Mode on PT charger. Geared up the 19t as Glyn @
BRM Racing Ended up on just shy of 62mmpr on 3700’s. Unable to feel a benefit of using Multi Phasic Charge Mode although data on their website says there’s a difference.
Settings used were
5/7/5 L/L/L
tried varying the mah lockout's and pulse setting
I'll have another go this weekend @
TRCC all being well