There are still a few stock parts left. LOL

It's a work in progress. Here's the list of parts I have for it so far.

Aluminum Quad Battery Chassis
Aluminum Chassis Braces
Aluminum Bulkheads
Aluminum Diffs/Rear has hard gears with aluminum diff cup
Aluminum Bumpers
Aluminum Shock Towers
Cvd's on all 4 corners plus cvd centers
Dual cooling fans powered off a 7.2 volt Lithium Ion Battery pack - this also powers the radio and the servos
Purple RPM A-arms - not installed yet
Purple cvd boots - not installed yet
64 tooth spur with all 12 friction pegs installed/21 tooth pinions

Dual Brushless ESC's/Hv Maxx Motors

Currently running 4-3300 mah packs - I plan on adding for more cells to bump the voltage to each ESC from 14.4 to 16.8 This will yield a significant speed/power increase. However, I see no reason to do this yet as I'm not yet able to put this much power to the ground without breaking parts. LOL

In an earlier post, I had said that I thought it has snapped the ring screws in the rear diff. That's not what happened. I still had the plastic drive shafts on all 4 corners at the time. It snapped one of those! LOL