Originally Posted by ml
Try these settings. Put throttle travel to maximum (150 on KO Propo Helios) and set brake to 100 on setup. Reduce push brake to 90-95% on the transmitter. Set Mode 1 = 1, Mode 2 = 3, Mode 3 (initial brake) = 2, Mode 4 (automatic brake) = 2 (medium). I used 23/98 with 1.84" Jaco two stage tires. Also try value 3 for modes 3 and 4, depending on your track size. The Nats track was flowing, so not much automatic brake was needed. You may also want to use thinner wire to the motor.
Thanks for posting your setup, Mike!
I noticed from the pictures that I have seen that smaller gauge wire might make for a cleaner application. Did you reduce the size of your wire to the motor and if you did, was there any noticeable loss in power? In addition, what size wire did you use?
Thanks!