setup advice asked.
I run on carpet with sorex28 on a tight track.
The car feels very good at this moment, the only problem I have is when I go into the turn at the end of the straight at full speed, the rear is that little unstable.
Not very much, but enough to loose the rear sometimes.
19t motor
front copper spring
rear gold spring
40 wt around
1,5° camber front
1,75° camber rear
0° toe in/out front
3° toe in rear
4° caster
no one-way or spool.
camber links as in the manual.
Please setup tips with the standard pieces, so no ultra design changes.
Thanks alot!