Thread: Team Losi JRXS
View Single Post
Old 09-18-2005, 04:51 PM
Rob Phillips
Tech Master
iTrader: (6)
Rob Phillips's Avatar
Join Date: Nov 2004
Location: Indianapolis / VA
Posts: 1,722
Trader Rating: 6 (100%+)

Originally Posted by rinkrat99
Hi all

I have a concern that my rear droop screws do not touch the chassis and therefore are useless. The car is setup for carpet with 56.5mm tires, ride height 5mm and the shock tower is in position 2 with the arm position Outside.

With this setup, I get maybe 1.5mm droop if lucky but nothing more cause the shocks are fully extended. I treid moving to position 1 and still the same. How can i get more rear droop if needed?

Measure the lenth of your shocks and see what you come up with. Should be around 62mm. I'm assuming the position of your tower is in the lowest setting, if not put it there and that should take of the problem. I run tires down to about 52mm, yeah that's right, all the way down to the rim, and I still get about 2.5mm of droop.
Rob Phillips is offline  
Reply With Quote