mxs

***Moved to 1/12 section******


Hi guys,

I am new to 1/12 and just building my L4. I will need to make a choice soon as far as a servo goes.

Obviously I've done some reading, but still have some questions.

I have a choice to buy 9650 or 9602 for the same money, so my question is which one to go with. In my opinion 9602 seems to have upperhand because it's faster at 4.8V and have enough torque, but should consume the same if not less power then the digital 9650. Slower, but higher torque which I am not sure is that needed for light 1/12.

Any opinions welcomed.

Thanks