Originally Posted by Brandon Melton
One thing I did notice with a batch I got is you need to use a .126 or 1/8in reamer for the holes in the top and bottom. The holes were very snug and bound up the steering. I only had the issue with two sets, so hopefully they aren't in circulation anymore, as my new kit was perfect. Just FYI if anyone noticed a bind in their steering when replacing a knuckle.
Yeah, some of the newest ones are tighter. You actually want a 3mm reamer as that is the size of the kingpin. 1/8th is too big as 3mm is .118" so that is .007" of slop. The knuckles wear out in like 3 runs pretty badly.
You can even get a .1185" reamer for a perfect feel.
Jeff