Thread: Hpi Pro 4
View Single Post
Old 08-25-2005, 11:49 AM   #12604
rc-zombies
Tech Champion
 
rc-zombies's Avatar
 
Join Date: Aug 2001
Location: NorCal. Napa area
Posts: 7,212
Trader Rating: 8 (100%+)
Default

Quote:
Originally Posted by fjm9898
what i wanted about the heatsink plate was does it accually help heat. i already have myself some 05 plates, well cut stock ones, but heat is always an issue and i didnt know if a heat sink plate accually helps because not very much air runs accross the pate.

for the camber plate in the picute on rc model doesnt show the spacers so i was a bit concerned.
Heastink mounts works some-what..but a clip-on motor heatsink will probably work alot better since is covering a bigger area (the can) and fins to dissapate the heat.

for the CF plates..if the pics show they are packaged..then they might be behind the plates or instructions..they are seperately packaged inside.
__________________
HB WCE HARA EDITION CYCLONE: LRP Sphere TC, KO 2363 digital servo.
HB HARA EDITION PRO4: Gone to a new home..

SPEEDTECH|FUTABA|KO|ORION|SPEEDWORLD|HARA
rc-zombies is offline   Reply With Quote