View Single Post
Old 08-03-2005, 08:03 PM
  #3497  
kewdawg
Tech Elite
iTrader: (3)
 
kewdawg's Avatar
 
Join Date: Feb 2004
Location: Sneederville, USA
Posts: 3,315
Trader Rating: 3 (100%+)
Default

Originally Posted by ziggy12345
The rear pully that drives the diff on the brake shaft wears out quick. Replace every 2 meetings or better still replace with metal one (it still wears out!)

The front diff drives undercut if you use the kyosho CVJs. Use the 3 racing oners as they have a bigger dia pin through them. Replace the drives every 3 meetings. The CVJ's also undercut and need replacing. Just check for play

The rear diff drives undercut as above. Replace every 3 meetings

The roll centre inserts wear out every 3 meetings. Replace

The steering balls wear out. Replace with titanium

Change the shock mounting balls for bolts

Cheers
Sheeesh! Are we talking about the same nitro car? What are you doing to that poor, little, dynamo?
kewdawg is offline  
Reply With Quote