Originally Posted by Mabuchi540
some settings on the Rapida pro when running 1/12th with a 540 stock (silver can)?
Just wondering if I should go for stock settings like I do with my TC or 1/12th settings as suggested in the back of the manual.
Whew...Mabuchi 1/12th
....ok...
If you tell me you are running 4 cells
I'm going to suggest you take up knitting...its more action packed
!
You will need to set up your speed as aggressive as possible.
In the Set Mode:
Nutr: 5p
Min Drive: 10p
Min Brake: 0p or Whatever you want, you'll never use them
Neutral brake: 0P
Ebr: Off
ENSA: 100
In the Freq Mode:
Drive Freq: Really low...like 0.1 to 1.0 This is to get more punch
Brake Freq: Whatever you want, you'll never use them
Neutral Brake: Whatever you want, you'll never use them
No other settings really affect power so thats it.
Let me know how it goes!