This setup should work pretty good if traction is decent and the track is not to rough.
front
camber 1.5
caster centered
track width 195 requires you to shorten the lower arm about 2 mm per side behind the pivot ball (important do it, verify hubs don't bind on lower arms at full right left lock when suspension is all the way down))
blue 1.7 mm tm springs
2 hole pistons in shocks
40 wt shock oil (associated)
shocks layed down all the way
droop kit setting
ride height 4.5
tire dia 60 mm
shore 40 or 37
sway bar flat
toe 0 to .5 out
rear
camber 3.5
track width 200mm
pink 1.4 mm tm springs
1 hole pistons in shocks
40 wt shock oil (associated)
shocks layed down all the way
10,000 wt diff oil (mugen)
toe in 2 per side
tire shore 40
tire dia 60.5
ride height 5.0
droop (kit setting)
rear sway bar removed (be sure to take it off)
camber links lower hole inside, upper hole outside
Gearing 19-25 51-46
internal ratio 19 (stock)
clutch spring 1.7 tm orange
Body mazda 6 or protoform 3.1 stratus