Originally Posted by rinkrat99
Hi all
I was running carpet the other day and had the tire diameters at 58.5mm and running Silver springs in the rear but I was unable to get a 5mm ride height in the rear. The threaded shock collars were at there maximum. The shock tower was at the 2nd innermost (standup) setting. I was able to get barley 5mm when laying the shocks down (4th outtermost hole) but again I had very little adjustment ability with the shovck collar.
Any thoughts?
Thanks
You can cut 1/8" off of the top of the lower shock shaft end to lower the spring keeper. This may give you just enough to get your ride height right. Good Luck
Brant