WHich PS. I use the Pyramid 20 amp...well here is the one I use.
http://www.buyreliant.com/psupplies/psv200.htm
I have had not one problem with it in almost a year of continuos use. I bought a second one for all the excessories...i.e. motor master, comm lathe, Smart tray, fans and what everyelse that uses 12V, while the other is soley used for chargers...I use two chargers....
-Shookie <><
Sounds like you might have gotten a bad PS or your Orion is eatinng too many amps.
Originally Posted by EVOtech
I decided our 7A linear PSU was too heavy to keep lugging around and so bought a 20A switch-mode unit, which is less than half the weight.
When the Advantage is step-charging, it manages steps 1 and 2 OK, but in the transition to step 3 trips the swich-mode out. I'm using 7A/0.5A/6A
For this to happen, the current has to be more than 25A. Might this indicate a first-batch problem?
It
seems to behave OK on the linear supply.
